Filter
Top Products
Hermes Operator Note Page 27 of 32
A typical programming sequence display is as follows:
PPPPP...........................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
..........................................PPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
PPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP.::::
:
Flash Programming Successful!!
Hermes®, © 2001, Wood & Douglas Ltd.
Apply a DC reset to the modem before using the modem.
If an error in the data is received the modem responds with:
Flash Programming Failed!!
Hermes®, © 2001, Wood & Douglas Ltd.
If power is lost or some other problem occurs before the upload is
completed, the next time the modem is powered on it automatically requests
new data by outputting the above message. This repeats until the code load
is successful.