Filter
Top Products
6 MECHANICAL SPECIFICATION
6.1 Enclosures
6.1.1 Casting Enclosure
The casting enclosure is shown in Figure 2. The enclosure has 4 off M4
fixings. There are raised bosses on the base of the unit to enable water to
run underneath the unit when mounted on a vertical surface. Figure 3
shows the connector layout under the protective casting overhang which
prevents any water ingress when mounted vertically. The lid has an IP65
rated gasket to ensure no water ingress. The outline dimensions of the
casting are:
169.3 x 129.2 x 38.5mm (6.67" x 5.09" x 1.52")
The weight of the unit using a G-MAX radio is ~612g (21.6oz).
The weight of the unit using a SXn50 radio is ~600g (21oz).
6.1.2 3U Rack Mounting Enclosure
The modem can also be supplied in a 3U high, 5HP wide by 101mm, rack
mount enclosure, as shown in Figure 4.
The weight of the unit using a G-MAX radio is ~580g (20.5oz).
The weight of the unit using a SXn50 radio is ~560g (20oz).
Hermes Operator Note Page 30 of 32