Juniper Networks ERX-1410 Network Router User Manual


 
Connection Information
ERX Edge Routers
B-7
Connection Information
Table B-3 shows the names of the line modules and I/O modules that you
can combine to form the different module assemblies. This table also
provides cabling specifications for the I/O modules.
Table B-3 Connection information for module assemblies
Assembly
Name and
Capability
Line
Module
Label
I/O Module
Label
No. of
Ports
Connector Type Cabling Specifications
CE1 CE1 CE1
FULL
I/O
20 RJ-48C,120 ohm
BNC, 75 ohm
via a balun panel
that connects to
the I/O module
Use shielded cables to
maintain EMC compliance.
The transmitted signal
complies with ITUT G.703:
Physical/electrical
characteristics of hierarchical
digital interfaces (November
2001) for cable lengths up to
450 m (492 yards).
cOC3/STM1
multimode
cOCx/STMx
F0
cOC3
STM1
F0 I/O
MULTI
MODE
4 SC full duplex Tx power:
min: –19 dBm
max: –14 dBm
Center wavelength: 1310 nm
Rx input power:
min: –30 dBm
max: –14 dBm
Rated for 2 km (1.2 miles)
over 62.5-micron core cable
with an optical loss of 0–9 dB
or 50-micron core cable with
an optical loss of 7 dB
cOC3/STM1
single mode
intermediate
reach
cOCx/STMx
F0
cOC3
STM1
F0 I/O
SINGLE
MODE
4 SC full duplex Tx power:
min: –15 dBm
max: –8 dBm
Center wavelength: 1310 nm
Rx input power:
min: –31 dBm
max: –8 dBm
Rated for 15 km (9.3 miles) of
9-micron core cable