Juniper Networks ERX-1410 Network Router User Manual


 
CHAPTER 2
Installing the ERX System
2-2
Figure 2-1 Packaged ERX-1400 series
To unpack the ERX-1400 series:
1 Cut the two straps that secure the carton to the skid. See Figure 2-1.
2 Open the carton from the top.
3 Remove the box of accessories that sits on top of the router.
4 Unlock the four plastic clips that hold the box to the skid by
squeezing them in their center and pulling out. See Figure 2-1.
5 Lift the carton off the router. See Figure 2-2.
Shipping
carton
Shipping
skid
Clips
Shipping
straps