Filter
Top Products
Objectives xi
About This Guide
This preface provides the following guidelines for using the Juniper Networks
EX2500 Ethernet Switch Configuration Guide:
Objectives on page xi
Audience on page xi
Supported Platforms on page xi
Documentation Conventions on page xii
List of Technical Publications on page xiii
Documentation Feedback on page xiii
Requesting Technical Support on page xiii
Objectives
This guide describes how to configure and use the software on the EX2500
Ethernet Switch.
Audience
This guide is intended for network installers and system administrators engaged in
configuring and maintaining a network. Administrators must be familiar with
Ethernet concepts, IP addressing, the IEEE 802.1D Spanning Tree Protocol (STP),
and SNMP configuration.
Supported Platforms
The features described in this guide are supported by only the EX2500 software
running on EX2500 Ethernet Switches only.
NOTE: This guide documents Release 3.0 of the EX2500 Ethernet Switch. For
additional information—either corrections to or information that might have been
omitted from this manual—see the EX2500 Ethernet Switch 3.0 Release Notes at
http://www.juniper.net/.