Filter
Top Products
33
NTSC(480i)
ENGLISH
PIXEL CLOCK
POSITION
PICTURE
OPTIONS
SOURCE
CHANNEL
USER SOURCE SET UP
DISPLAY SIZE
DECODER
LANGUAGE
YPBPR
CH: 1
HDTV(1080i)
Operating the Main Menu (Cont.)
Operating the Main Menu (Basic Operation of the Main Menu)
Submenu items
Input line
Source
Decoder (color system) Language
For projector’s menus, the setting menu and the main menu are
available.
Here, we explain about the operation of the main menu.
For the setting menu, refer to “Making Basic Settings” on page 30.
1
Press the MENU/ENTER button.
• The main menu is displayed on the screen.
2
Press MENU/ENTER toward the 5 or ∞
mark to select an item.
• The selected item (displayed text) is shown in magenta color
on the screen.
3
Set (adjust) the item.
■ When you have selected DECODER or LANGUAGE,
• Press MENU/ENTER toward the 2 or 3 mark to set.
* To finish the main menu, press the PAGE BACK button.
■ When you have selected an item on the submenu,
• Press MENU/ENTER to display the submenu. Then, set
(adjust) the item by pressing MENU/ENTER toward the 2/3
or 5/∞ mark.
* To return to the main menu, press PAGE BACK again. To
finish the main menu, press PAGE BACK again. (To finish the
main menu from the submenu, press PAGE BACK twice.)
■ About main menu display:
Line display: The selected input-mode designation is
displayed. For input-mode designation, “Y/C”,
“VIDEO”, “YPBPR”, “RGB 1” and “RGB 2” are
available.
Source display: The type of signal being input is displayed. With
this projector, unique designations are
previously given to specific horizontal and
vertical frequencies. This allows the source
selected under SOURCE (submenu item) to
be indicated. The source setting can be
selected from AUTO mode, dedicated (forced)
modes and USER mode. When AUTO is
selected, the horizontal and vertical
frequencies of a signal being input are detected
and the matched designation is displayed
in ( ).
Therefore, be careful as the source display
does not always correspond to the indication
or type of the input signal.
For the unique designations for the specific
horizontal and vertical frequencies, see page
19.
Channel display: The channel selected by the user is displayed.
The line and sources selected by the user have
been registered to the channel. Once
registered, the line and sources of the projector
will change to the ones the user has registered
only by switching between channels. The
settings should be made on the “Channel
setup/selection menu”. For details, see page
47.
Submenu item display: See pages 36 to 58.
Decoder (Color system) display: See page 34.
Language display: See page 35.
■ Remote control unit
■ Main menu
M
E
N
U
/
E
N
T
E
R
QUICK
ALIGN.
AV HIDE
OPERATE
PRESET
AV
SHIFT ZOOM FOCUS
LENS
UT
+
DW
–
RGB/COMPUTER
LENS
LOCK UNLOCK
PAGE BACK
PAGE BACK button
MENU/ENTER button
Channel
M4000LU p.33-43 00.10.3, 11:04 AM33