Filter
Top Products
Operation
55
ENGLISH
Adjustments and settings in the menu (continued)
Off
Power is not turned off.
1 Hour
Power is turned off automatically after 1 hour.
2 Hours
Power is turned off automatically after 2 hours.
3 Hours
Power is turned off automatically after 3 hours.
4 Hours
Power is turned off automatically after 4 hours.
High Altitude Mode
Set to use at low pressure locations (900m above sea level).
Settings: On, Off [Off]
On
Set.
Off
Do not set.
Communication
Terminal
Sets the used control terminal. It is not possible to use it at the same time.
Settings: RS-232C, LAN [RS-232C]
RS-232C Sets the RS-232C terminal.
LAN Sets the LAN terminal.
Network It is displayed, if the setting of the "Communication terminal” to the submenu "[5-1]
Network" is set to "LAN".
Lamp Reset Reset of the lamp use time to "0".
[5-1] Network
DHCP Client
Sets the DHCP client.
Settings: On, Off [Off]
On
Obtains automatically an IP address from within the connected network's DHCP server.
* The automatic retrieval starts with the "Set" within the menu.
Off
The network settings are being done manually.
IP Address
Sets the IP address. [192.168.0.2]
Subnet Mask
Sets the subnet mask. [255.255.255.0]
Default Gateway
Sets the default gateway. [192.168.0.254]
MAC Address
Displays the MAC address of the unit.
Set
[5-1] Reects the network setting.
[6] Information
Displays upon HDMI/COMP. input
Input
Displays video image input terminal.
Source
Displays the name of the input source.
Deep Color
Displays the color bit depth concerning an input video image signal.
* When you input YCbCr (4:2:2), it is not displayed.
* When there is information about DeepColor from the source device, it is displayed.
Lamp Time
Displays the lamp use time.
Displays upon PC input
Input
Displays video image input terminal.
Resolution
Displays image resolution.
H Frequency
Displays the H Frequency.
V Frequency
Displays V Frequency.
Deep Color
Displays the color bit depth concerning an input video image signal.
* When you input YCbCr (4:2:2), it is not displayed.
* When there is information about DeepColor from the source device, it is displayed.
Lamp Time
Displays the lamp use time.
RS50
RS50
RS60
RS50
RS50
RS60
RS50
RS50
RS60