JVC DT-V20L1 Computer Monitor User Manual


 
17
Specifications
7 General
Model name
DT-V24L1D/DT-V24L1 DT-V20L1D/DT-V20L1
Type
Multi format LCD monitor
Screen size
Type 24 wide format Type 20 wide format
Aspect ratio
16:10
LCD panel
24˝ wide, active matrix TFT 20˝ wide, active matrix TFT
Effective screen size
Width : 518.4 mm (20
3
/8˝)
Height : 324 mm (12
3
/4˝)
Width : 433.4 mm (17
1
/16˝)
Height : 270.9 mm (10
5
/8˝)
Number of pixels displayed
1 920 x 1 200 1 680 x 1 050
Number of colors displayed
16.77 million (256 colors for each RGB)
Viewing angle (TYP.)
176° (Horizontally), 176° (Vertically) 170° (Horizontally), 170° (Vertically)
Brightness (at least) (TYP.)
400 cd/m
2
Contrast ratio (TYP.)
1 000:1 800:1
Horizontal/vertical frequency
(computer signal)
H : 31.469 kHz – 75.000 kHz
V : 60 Hz ± 5 Hz
H : 31.469 kHz – 75.000 kHz
V : 60 Hz ± 5 Hz
* Some signals within this frequency range may not be displayed (“Out of range” is
displayed).
Compliant video signal format
“Available signals” on page 9
Format
(DT-V24L1D and DT-V20L1D only)
HD SDI : BTA S-004B, SMPTE292M
SD SDI : ITU-R BT.656 : 525/625
SMPTE259M : 525
EMBEDDED AUDIO : SMPTE299M, SMPTE272M
Audio output
Internal speaker : 1 W + 1 W
Operating conditions
Operating temperature : 5° C – 35 °C (41 °F – 95 °F)
Operating humidity : 20 % – 80 % (non-condensing)
* Slightly variable depending on ambient conditions for installation.
Power requirements
AC 120 V/AC 220 – 240 V, 50 Hz/60 Hz
Rated current
1.15 A (AC 120 V)/0.67 A (AC 220 – 240 V) 1.00 A (AC 120 V)/0.60 A (AC 220 – 240 V)
External dimensions
(excluding protruding parts)
Width : 564 mm (22
1
/4˝) 564 mm (22
1
/4˝)
Height : 448.6 mm (17
3
/4˝) 408 mm (16
1
/8˝)
Depth : 243 mm (9
5
/8˝) 99 mm (4˝)
(with the stand) (without the
stand)
Width : 477 mm (18
7
/8˝) 477 mm (18
7
/8˝)
Height : 394.6 mm (15
5
/8˝) 354 mm (14˝)
Depth : 243 mm (9
5
/8˝) 99 mm (4˝)
(with the stand) (without the
stand)
Weight
11.6 kg (25.5 lbs) (
with the stand
)
8.7 kg (19.1 lbs) (
without the stand
)
10.3 kg (22.7 lbs) (
with the stand
)
7.4 kg (16.3 lbs) (
without the stand
)
Accessories
AC power cord x 1, Power cord holder x 1, Screw x 2 (for power cord holder)
Notice on transportation
This monitor is precision equipment and needs dedicated packing material for transportation.
Never use any packing material supplied from sources other than JVC or JVC-authorized dealers.
Options (not supplied)
RACK MOUNT ADAPTER (DT-V20L1D and DT-V20L1 only): RK-C20L1
• For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed,
and may be slightly different from actual products.
• Design and specifications are subject to change without notice.
• All company names and product names mentioned herein are used for identification purposes only, and may
be the trademarks or registered trademarks of their respective companies.
7 Input/output terminals
Model name
DT-V24L1D/DT-V20L1D DT-V24L1/DT-V20L1
Video
VIDEO
(INPUT 1)
Input/output of composite signal
: 1 line, BNC connector x 2, 1 V(p-p), 75
* The input (IN) and output (OUT) terminals are bridge-connected (auto termination).
VIDEO
(INPUT 2)
DVI-D (HDCP)
DVI-D signal input (compatible with HDCP)
: DVI-D connector x 1 (compatible with DDC2B)
COMPO./RGB
(G/Y, B/P
B/B-Y,
R/P
R/R-Y)
Input/output of analog component signal/analog RGB signal
: 1 line, BNC connector x 6
Video signal : G/Y : 1 V(p-p), 75 (including sync signal)
B/P
B/B-Y, R/PR/R-Y : 0.7 V(p-p), 75
* The input (IN) and output (OUT) terminals are bridge-connected (auto termination).
EXT.SYNC (CS)
Input/output of composite sync signal
: 1 line, BNC connector x 2,
0.3 V(p-p) – 4 V(p-p),
75 (tri-level sync, negative polarity sync (bi-level), and BB)
(including no video signal)
* The input (IN) and output (OUT) terminals are bridge-connected (auto termination).
HD/SD SDI (IN 1)
Digital signal input
(compatible with EMBEDDED AUDIO)
: auto detection, 1 line,
BNC connector x 1
HD/SD SDI (IN 2)
HD/SD SDI
(SWITCHED OUT)
Digital signal output
(compatible with EMBEDDED AUDIO)
: 1 line switched out,
BNC connector x 1
Audio
AUDIO ASSIGN
(IN 1)
Analog audio signal input : 1 line, RCA connector x 2,
500 mV (rms), high impedance
AUDIO ASSIGN
(IN 2)
AUDIO ASSIGN
(MONITOR OUT)
Analog audio signal output : 1 line, RCA connector x 2,
500 mV (rms)
External control
REMOTE (MAKE/
TRIG.)
“Using the MAKE/TRIGGER system” on page 14
REMOTE
(RS-485)
“Using the serial communication” on page 15
REMOTE
(RS-232C)
DT-V2420L1D_UA_R.indd 17DT-V2420L1D_UA_R.indd 17 06.11.17 10:40:25 AM06.11.17 10:40:25 AM