Filter
Top Products
18
HOW TO USE “SETUP MENU” (cont'd)
<DISTORTION ADJ.>
PINCUSHION : 00
PIN.BALANCE : 00
PARALLELOGRAM : 00
TRAPEZOID : 00
ROTATION : 00
sub menu
reset
EXIT:
MENU
ADJUST:- + SELECT:
5. DISTORTION ADJ.
Compensates the picture
distortion. Press the
button
to display the setting menu
illustrated on the right.
Item : PINCUSHION
Adjustment
range : –20 ~ 00 ~ +20
Function : Compensates pincushion picture distortion.
– : Expands both left and right sides of the
picture.
+ : Squeezes both left and right sides of the
picture.
Item : PIN.BALANCE
Adjustment
range : –20 ~ 00 ~ +20
Function : Adjusts the compensation balance of the
pincushion picture distortion.
– : The picture is expanded on the left side, and
squeezed on the right side.
+ : The picture is squeezed on the left side, and
expanded on the right side.
Item : PARALLELOGRAM
Adjustment
range : –20 ~ 00 ~ +20
Function : Compensates parallelogram picture
distortion.
– : Moves the upper side of the picture to the
right, and the lower side to the left.
+ : Moves the upper side of the picture to the left,
and the lower side to the right.
Item : TRAPEZOID
Adjustment
range : –20 ~ 00 ~ +20
Function : Compensates trapezoid picture distortion.
– : Enlarges the upper side of the picture.
+ : Reduces the upper side of the picture.
Item : ROTATION
Adjustment
range : –31 ~ 00 ~ +31
Function : Compensates for picture tilt.
– : Turns the picture clockwise.
+ : Turns the picture counterclockwise.
Item : sub menu
Adjustment range/
Settings : Same as PINCUSHION, PIN.BALANCE, PARAL-
LELOGRAM, TRAPEZOID and ROTATION.
Function : Performs PINCUSHION, PIN.BALANCE,
PARALLELOGRAM, TRAPEZOID or ROTATION
settings in a single-line display. The sub menu
display varies depending on the selected item.
Item : reset
Function : Sets the PINCUSHION, PIN.BALANCE,
PARALLELOGRAM, TRAPEZOID and ROTATION
values to factory-preset ones.
<SIZE/POSI. ADJ.>
H.SIZE : 00
H.POSITION : 00
V.SIZE : 00
V.POSITION : 00
sub menu
reset
EXIT:
MENU
ADJUST:- + SELECT:
Item : H.SIZE
Adjustment
range : –20 ~ 00 ~ +20 (*)
Function : Adjusts the horizontal screen size.
– : Reduces the screen size horizontally.
+ : Enlarges the screen size horizontally.
*Reduced to 00 ~ +20 during the under-scanmode.
Item : H.POSITION
Adjustment
range : –20 ~ 00 ~ +20
Function : Adjusts the horizontal screen position.
– : Move the screen to the left.
+ : Move the screen to the right.
Item : V.SIZE
Adjustment
range : –20 ~ 00 ~ +20
Function : Adjusts the vertical screen size.
– : Reduces the screen size vertically.
+ : Enlarges the screen size vertically.
Item : V.POSITION
Adjustment
range : –20 ~ 00 ~ +20
Function : Adjusts the vertical screen position.
– : Move the screen up.
+ : Move the screen down.
Item : sub menu
Adjustment range/
Settings : Same as H.SIZE, H.POSITION, V.SIZE and
V.POSITION.
Function : Performs H.SIZE, H.POSITION, V.SIZE or
V.POSITION settings in a single-line display. The
sub menu display varies depending on the
selected item.
Item : reset
Function : Sets the H.SIZE, H.POSITION, V.SIZE and
V.POSITION values to factory-preset ones.
4. SIZE/POSI. ADJ.
Adjusts the size or position of
the picture. Press the
button to display the setting
menu illustrated on the right.
LCT1117-001A 02.1.29, 2:32 PM18