JVC GM-V42E Computer Monitor User Manual


 
16
PICTURE ADJ.
SIZE/POSITION ADJ.
FUNCTION SELECT
STATUS DISPLAY
ENTER:
MAIN MENU
SELECT:
EXIT:
MENU
Video Adjustments
For video adjustments, use menus.
You can use the buttons either on the remote control or on
Monitor for menu operations.
Refer also to Menu Classifications on pages 34 and 36.
Adjusting the Picture Quality
Picture quality can be set for each input mode.
1
Press MENU/EXIT (or MENU on the
Monitor) to display the Main Menu.
2
Press 5/ to move the cursor (3) to
PICTURE ADJ.
3
Press 3 to display the Picture
Adjustment Menu.
4
Press 5/ to move the cursor (3) to the
item you want to adjust.
Item Adjustment Standard
range (Reset)
CONTRAST 20 to +20 +10
BRIGHT (brightness) 20 to +20 0
CHROMA*
1
20 to +20 0
PHASE*
2
20 to +20 0
SHARPNESS 10 to +10 0
sub menu See To make an adjustment
while viewing the adjustment
bar on the next page.
reset See To reset the adjustments on
the next page.
*
1
Adjustable when viewing the NTSC, PAL or SECAM
signal, or component signal.
*
2
Adjustable when viewing the NTSC signal or
component signals.
5
Press 2/3 to make adjustments.
6
Press MENU/EXIT (or MENU on the
Monitor) twice to exit from the menu
operations.
CONTRAST
BRIGHT
CHROMA
PHASE
SHARPNESS
sub menu
reset
ADJUST:
PICTURE ADJ.
SELECT:
EXIT:
MENU
VIDEO A
: +01
:
: 02
:
:
00
00
00
Cursor (3)
2 / 3
5 /
5
VIDEO
DISPLAY
OFF POWER
RMC579 REMOTE CONTROL UNIT
ON
ASPECT
MUTING
MENU/EXIT
VOLUME
A
COMPO.
/(RGB B)
B RGB A
INPUT SELECT
MENU/EXIT
MENU INPUT
MENU INPUT
MENU
2 / 3
5
5 /
14_23_GM_V42[E].p65 03.6.23, 4:43 PM16