JVC GM-V42E Computer Monitor User Manual


 
26
Other Convenient Functions (Continued)
Prohibiting the Monitor’s Button Operations
This function allows you to prohibit the button operations on
the Monitor to prevent malfunction or avoid tampering.
1
On the remote control:
Press MENU/EXIT while holding
VOLUME to display the Setup Menu.
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
2
Press 5/ to move the cursor (3) to
CONTROL LOCK.
The Setup Menu consists of two pages. If you keep
pressing 5/, you can move to the other page from
the current page.
3
Press 2/3 to select the desired setting.
Each time you press the button, the Control Lock
function alternates between ON and OFF.
To cancel the Control Lock function, select OFF.
4
Press MENU/EXIT (or MENU on the
Monitor) once to exit from the menu
operations.
Note:
Even when the Control Lock function is in use, the
following operations are possible:
Operation to cancel the Control Lock function
All operations from the remote control
Cursor (3)
STATUS DISPLAY
CONTROL LOCK
REMOTE SWITCH
HD SIGNAL MODE
WHITE BALANCE
TIMER
SET-UP MENU 1/2
ADJUST:
SELECT:
EXIT:
MENU
: OFF
: OFF
: MODE1
: 1080i
VOLUME
VIDEO
DISPLAY
OFF POWER
RMC579 REMOTE CONTROL UNIT
ON
ASPECT
MUTING
MENU/EXIT
VOLUME
A
COMPO.
/(RGB B)
B RGB A
INPUT SELECT
2 / 3
5 /
5
MENU/EXIT
*
1
For GM-V42PCE, GM-V42PCEG and GM-V42PCEB:
REMOTE SWITCH does not appear on the menu
unless the video input unit (IF-C42P1G) is separately
purchased and installed.
*
1
MENU INPUT
MENU INPUT
MENU
2 / 3
5
5 /
24_33_GM_V42[E].p65 03.6.23, 4:43 PM26