JVC GM-V42E Computer Monitor User Manual


 
31
ENGLISH
START TIME
You can adjust the time to activate the function.
Set the hour and minute following steps 4 to 6 in
Setting the Clock (page 28).
END SET
You can activate/deactivate the Color-Reverse Off Timer.
Press 2/3 to select ON or OFF.
ON: The function is automatically deactivated at the
time set in END TIME.
OFF: The Color-Reverse Off Timer is deactivated.
END TIME
You can adjust the time to deactivate the function.
Set the hour and minute following steps 4 to 6 in
Setting the Clock (page 28).
4
Press MENU/EXIT (or MENU on the
Monitor) repeatedly to exit from the
menu operations.
To cancel the Color-Reverse function immediately
Repeat steps
1
to
3
, then select OFF in COLOR-REVERSE
by pressing 2/3.
Refreshing the Screen
After the power is turned off, a whitish image may be left on
the screen. In that case, leave the monitor in a white back state
for a while, and the image will disappear.
You can activate/deactivate the function with the Refresh
On/Off Timer.
1
On the remote control:
Press MENU/EXIT while holding
VOLUME to display the Setup Menu.
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
2
Press 5/ to move the cursor (3) to
REFRESH (on the second page) then
press 3.
The Setup Menu consists of two pages. If you keep
pressing 5/, you can move to the other page from
the current page.
STATUS DISPLAY
CONTROL LOCK
REMOTE SWITCH
HD SIGNAL MODE
WHITE BALANCE
TIMER
SET-UP MENU 1/2
ADJUST:
SELECT:
EXIT:
MENU
: OFF
: OFF
: MODE1
: 1080i
Cursor (3)
PIXEL SHIFT
POWER SAVE
COLOR-REVERSE
REFRESH
reset
all reset
HOUR METER x100h
MODEL NAME
SET-UP MENU 2/2
ADJUST:
SELECT:
EXIT:
MENU
: OFF
: OFF
: 123
: GM-V42PCE
3
Press 5/ to select the item you want
to set and set the item as follows.
REFRESH
You can activate/deactivate the function manually.
Press 2/3 to select the desired setting.
ON: The function is activated immediately after
exiting the menu operations.
OFF: The function is deactivated.
TIMER: Select this when you use the Refresh On/Off
Timer.
Note:
Set the clock (see page 28) and select TIMER, before
using the Refresh On/Off Timer.
START SET
You can activate/deactivate the Refresh On Timer.
Press 2/3 to select ON or OFF.
ON: The function is automatically activated at the
time set in START TIME.
OFF: The Refresh On Timer is deactivated.
START TIME
You can adjust the time to activate the function.
Set the hour and minute following steps 4 to 6 in
Setting the Clock (page 28).
END SET
You can activate/deactivate the Refresh Off Timer.
Press 2/3 to select ON or OFF.
ON: The function is automatically deactivated at the
time set in END TIME.
OFF: The Refresh Off Timer is deactivated.
END TIME
You can adjust the time to deactivate the function.
Set the hour and minute following steps 4 to 6 on
Setting the Clock (page 28).
4
Press MENU/EXIT (or MENU on the
Monitor) repeatedly to exit from the
menu operations.
To cancel the Refresh function immediately
Repeat steps
1
to
3
, then select OFF in REFRESH by
pressing 2/3.
*
1
24_33_GM_V42[E].p65 03.6.23, 4:43 PM31