Filter
Top Products
15
8. Set the camera stream setting according to the quality
setting.
When using for the camera driver, the stream setting
for the camera needs to be changed according to the
quality setting.
If you set the quality setting to [MPEG-2 TS(HD)]•
Set the camera stream setting to [MPEG-2 TS(HD) +
MotionJPEG].
If you set the quality setting to [MPEG-2 TS(SD)] or [AAC •
SOUND ONLY.]
Set the camera stream setting to [MPEG-2
TS(SD)+MotionJPEG].
In addition to the iOS, Android and Windows viewing
applications, the camera stream settings can also be set
from the setting web page.
For details on conguring the stream setting in the
Windows version, refer to "Viewing High Quality Video"
in "Chapter 2 Advanced Operations".
9. Start USTREAM Producer.
In the same way as for normal webcams and other
devices, add a camera from "Add Shot".
The camera names correspond to the numbers set in the
setup application. Four video cameras and four audio
cameras are displayed with names such as those on the
right.
The video and audio are separate, so you can use video
only, or combine the video and audio of dierent
cameras.
[Caution]
If an error is displayed, correct the cause of the error,
and then restart USTREAM Producer.
Once an error occurs, video and audio will not play
until USTREAM Producer is restarted.
10. Start streaming.
Start streaming using USTREAM Producer.
Video
1: JVC CAM Video 1
2: JVC CAM Video 2
3: JVC CAM Video 3
4: JVC CAM Video 4
Audio
1: JVC CAM Audio 1
2: JVC CAM Audio 2
3: JVC CAM Audio 3
4: JVC CAM Audio 4
Chapter 4 Streaming in Real-Time with USTREAM