Filter
Top Products
Now that you’ve completed the initial setup for the iNAS it’s time to decide on
how you want to implement the iNAS in your network. Most users will choose to
configure the iNAS in one of two ways:
1. The iNAS will be used as the Network’s router and a NAS device. (iNAS
is connected directly to a Cable/DSL modem)
2. OR the iNAS is configured as a NAS (Network Attached Storage) device
attached to your network somewhere behind a router.
Once you have decided on the setup, please follow the instructions below
according to the configuration you have chosen.
Connecting the iNAS as a router.
Kanguru iNAS 100
Cable/DSL
Modem
Connect the Cable/DSL modem to the WAN port of the iNAS
Configuring the iNAS as a NAS device
15