Kanguru Solutions iNAS-100 Network Router User Manual


 
NETWORK SETTINGS
After entering the Network Settings menu, please press the switch B to choose
DHCP or Static IP.
1. DHCP - Obtain IP Address Automatically
The Kanguru iNAS 100 will automatically obtain the IP address settings via
DHCP protocol.
2. STATIC IP - Specify Static IP Address
Press the switch A to select STATIC IP and complete the following steps:
SET STATIC IP
Press the switch B to set the IP address settings (press the switch B to
select the number 0~25). Press the switch A for the next number.
SET NETMASK
Follow the same procedure as above.
SET GATEWAY
Follow the same procedure as above.
SELECT STATIC IP
Press the switch B to select YES or NO and confirm by pressing switch
A. NO will return to the Network Settings menu.
RESTART SYSTEM
You need to restart the system to make changes effective. Press switch
B to select YES or NO and press the switch A to confirm.
POWER DOWN
Press switch A to shutdown the system.
REBOOT SYSTEM
Press switch A to reboot the system.
EXIT
Press switch A to exit the settings menu.
48