Ken-A-Vision m2013 Webcam User Manual


 
3.3 Click Install. (If Direct X 8.1 or higher is installed in your
computer already Windows XP, the installation continues
automatically). Your computer will restart after the installation of
Direct X. After restarting, continue the installation process
without selecting Direct X.
3.4 Click to select M Eye Driver. The installation continues
automatically. Your computer will ask you to restart. Click Yes.
3.5 Click to select each software for installation then, click install
3.6 Click Finish, when each software has been installed. Installation
proceeds until the message Installation Completed appears.
Note: M Eye Driver must be installed to operate the camera with
your computer.
10
3.6 Checking the Device Installation
To check if the Ken-A-Vision M Eye has been installed:
1. Plug in M Eye Camera
2. Click on Start, Settings, Control Panel.
3. For Windows 98 users: Select Device Manager. For Windows
XP and 2000 users: Select System, then Hardware, then
Device Manager.
4. Look for “Imaging Device” and double-click it. You should
find the device “Smart Cam Deluxe”.
5. Double-click on the Smart Cam Deluxe and check the “Device
Status” area if the device is working properly.
11
Software To Install
M Eye Driver
PhotoSuite
Video Wave
Vision Explorer
Start an install by clicking
a button on the left. We
recommend that you
install each application.
The
M Eye
Driver software must be
installed to use the camera with your
computer.