Ken-A-Vision m2013 Webcam User Manual


 
VII. Safety & FAQ
This chapter provides some basic troubleshooting when you encounter
problems installing or using the camera. It is important that you read
first the previous chapters and the bundled software documentation
before starting to find the problem. If this manual was not able to fix
your problem, please contact the dealer or manufacturer for customer
support.
7.1 General Maintenance and Safety
Following are some troubleshooting tips regarding Ken-A-Vision
M Eye hardware problems:
1. Avoid exposing the camera to moisture and extreme
temperature.
2. Do not touch the lens with your finger.
3. Do not put things on top of it or apply pressure on it.
4. Clean the camera using a clean, dry cloth. Do not use harsh or
abrasive solvents or cleaners.
5. When cleaning the lens, use a soft, lint-free cloth. Do not apply
pressure on the lens. Moisten the lens by breathing gently on it.
Avoid scratching the lens of the camera.
6. Do not try to pull or twist the cable of the camera as this might
damage it.
7. Do not disassemble or try to touch the inside of the camera.
This will void the warranty of your camera and may damage it
consequently.
8. Store camera in a clean and dry place.
18
I. Parts of Ken-A-Vision M
Eye
Ken-A-Vision M Eye Introduction
Snap Button Power ON/OFF Button
Flash Mode
Button
Flash
Flash Mode
LED
Microphone Focusing Ring
View Finder
USB Connector
Speaker
Power On/Off LED
Indicator
Lens
3