Filter
Top Products
13
3 Press the PTT switch or turn the
transceiver power OFF to confirm your
setting.
BATTERY INDICATOR/ BATTERY TYPE
The battery indicator on the display lets you know approxi-
mately how much battery life is remaining. When the battery
voltage becomes too low while transmitting, the transceiver
stops transmitting and a tone sounds until you release the
PTT switch. Recharge or replace the battery pack at this time.
High battery power
Medium battery power
Low battery power
Time to replace the batteries or recharge the battery pack
Depending on the type of batteries you are using in the
transceiver, adjust the battery type to match. The battery
indicator can only accurately read out the remaining battery
power if this value is set correctly. An incorrect setting will
result in an inaccurate battery power readout on the display.
1 Enter the Menu Settings (page 12) and
press the ▲ or ▼ key until you reach the
“
” display.
2 Press the
key to set the value to
alkaline batteries (
) or to the optional
UPB-1 battery pack ( ).
•You must set this menu each time the
battery type is changed.
3 Press the PTT switch or turn the
transceiver power OFF to confirm your
setting.