Filter
Top Products
5
INSTALLING/ REMOVING BATTERIES
This transceiver requires 3 LR6 (AA) batteries. Use high
quality alkaline batteries to enjoy longer periods of battery life.
You can also use an optional UPB-1 NiCd battery pack. When
using an optional battery pack, be sure to set the battery
indicator type to battery pack, from its default setting of
alkaline batteries. Refer to page 13 for details on how to set
the indicator type.
Average alkaline battery life: 24 hours
Average battery pack life: 12 hours
Average times are calculated using 10% transmit time, 10%
receive time, and 80% standby time
Note: Before installing/ removing batteries, you must rotate the
antenna out of the way (page 6).
1 Release the battery cover lock, then slide the cover away
from the transceiver.
2 Insert (or remove) 3 LR6 (AA) batteries or the optional
UPB-1 NiCd battery pack.
• Mate the battery polarities with those marked on the
battery compartment.
• When removing the battery pack, pull on the ribbon that is
attached to the pack to dislodge the pack from the battery
compartment.
PREPARATION
Battery cover
Lock