Kingston Technology KNS3250/R Switch User Manual


 
Kingston Technology Company KNS3250/R User’s Guide - Rev. A00
10 Kingston Switch Conguration Utility
Use this button to save the current conguration data to the device. After a
successful write operation, the device automatically resets and initializes the new
conguration.
If the write operation fails, check the following:
Verify the conguration cable is well connected.
Ensure that the conguration cable is connected directly from the PC to
the Switch. If any other devices are connected to the PC’s printer port, please
disconnect them before attempting the conguration of the switch.
Check the host PC to verify that the drivers for the Printer Port (LPT1) are
installed correctly.
Make sure the I/O address selected in the Printer Port I/O Address eld
matches the actual setting on the host PC.
Use this button to read the conguration data from the device. If the operation is
successful, the current conguration will become _Inside_Device_Conguration.
This button will write the factory default settings to the switch.
Use this button to quit the Switch Conguration Utility.