Filter
Top Products
Kingston Technology Company KNS3250/R User’s Guide - Rev. A00
44 Appendix E - Mounting Templates
Appendix E Mounting Templates
The Fast EtheRx dual-speed hubs can be stationed on a at surface using the four
rubber feet provided, or mounted in a standard 19” rack by using the mounting
brackets and thumb screws provided with the unit.
Rubber Feet for Desktops
The Fast EtheRx dual-speed hubs come with rubber feet that may be applied to the
bottom of the unit for desktop surface installations. The 4 rubber feet have peel-
off adhesive backing. Remove the backing and attach the feet to the bottom of the
switch.
Brackets for Rack Mounting
The Fast EtheRx dual-speed hubs can also be mounted in a standard 19” rack using
the brackets included with the unit. A rack mount installation uses a standard 19”
dimension. Align the holes in the brackets with the holes on each side of the unit.
Use the screws provided to secure the brackets to the Fast EtheRx dual-speed hub.
See Figure E-1 below:
Fig. E-1 Attaching the Mounting Brackets
Important Note: Although the bracket has four holes, only 2 holes are used.