Filter
Top Products
Special Features 3
KNS800/WG User’s Guide - Rev. B01 Kingston Technology Company
Special Features
•
Provides automatic switching function between 100Mbps and 10Mbps
•
Interconnect 100BASE-TX Fast Ethernet with 10BASE-T Ethernet
networks
•
Auto-Negotiation for 10/100Mbps speed selection, and for half-duplex
and full-duplex mode
•
Uses Store and Forward switching approach to minimize re-
transmission of faulty packets
•
Filtering/Forwarding rate of 148,800 packets/second at 100Mbps
•
Filtering/Forwarding rate of 14,880 packets/second at 10Mbps
•
Supports up to 1K MAC addresses
•
Supports collision-based backpressure flow control in half-duplex
operation
•
Supports IEEE 802.3x flow control in full-duplex operation
•
Link, Activity, 100TX Speed Detection, and Full Duplex LEDs for easy
troubleshooting
•
Power LED and Collision LED for collision detection
•
Last UTP port supports crossover or straight-through cabling
•
Conforms to IEEE 802.3u 100BASE-TX, IEEE 802.3i 10BASE-T, and
IEEE 802.3 CSMA/CD Ethernet Standards
Package Contents
Your Fast EtheRx Switch package should contain the following items:
‰ Fast EtheRx KNS500/WG or KNS800/WG Workgroup Fast Ethernet
Switch
‰ External power adapter (KNS500/WG)
‰ External auto-sensing power supply (KNS800/WG)
‰ AC power cord (KNS800/WG only)
‰ (4) Rubber feet
‰ User's Guide
If any of the above items are missing or damaged, please contact your Kingston
dealer for a replacement. Be sure the items you receive are genuine Kingston
products. If
the Kingston name and logo are not on the front panel of your unit,
it is not a genuine Kingston product.