Filter
Top Products
Hardware Installation 5
KNS800/WG User’s Guide - Rev. B01 Kingston Technology Company
Hardware Installation
Before you begin installing network cables, please take a few moments to
familiarize yourself with Fast EtheRx Switch. The functions on the front and
rear panels are illustrated in the following sections.
KNS500/WG
12345
Fast EtheRx Switch
100TX
LINK / ACT
FDX / COLL
Power LED
Full-Duplex /
Collision LEDs
Cascade Switch
100TX Speed
Detection LEDs
Link / Activity LEDs
PWR
10/100TX Workgroup
Fast Ethernet Switch
CASCADE
Fig. 1 – KNS500/WG Front Panel
KNS800/WG
12345678
CASCADE
Fast EtheRx Switch
10/100TXWorkgroup
Fast Ethernet Switch
100TX
LINK / ACT
FDX / COLL
PWR
Power LED
Full-Duplex /
Collision LEDs
Cascade Switch
100TX Speed
Detection LEDs
Link / Activity LEDs
Fig. 2-KNS800/WG Front Panel
Front Panel
Power LED
The PWR LED indicates the power status of the Fast EtheRx Switch. The LED
will light up steady green when the AC power cord is connected to the unit
from a power source.
100TX Speed Detection LED
The 100TX LED will automatically light up when 100Mbps operation is
detected. This LED will not light up if 10Mbps operation is detected.