Filter
Top Products
18
Presets
Presets: This allows you to customize settings and save
the settings to be restored later. To restore the factory
default settings, choose Factory Reset in the
Settings>Service menu.
To set a preset for the current source, adjust
the image, select Save Settings in the Presets menu,
then choose Save User 1, 2, or 3. You can recall these Save User Settings
settings in the future by selecting the appropriate
user presets. All settings in the Picture menu
(except Keystone) are saved and recalled.
Gamma: Gamma tables contain preset intensity
configurations optimized for the input source.
You can select a gamma table that has been Gamma
Specifically tuned for either film, CRT
(Cathode Ray Tube), Video, PC, or Bright
Room input. (Film input is material originally
captured on a film camera, like a movie; video
input is material originally captured on a video
camera, like a TV show or sporting event.)
White Peaking increases the brightness of whites that
are near 100 percent.
NOTE: Your viewing preferences may vary. Cycle through the gamma options and pick the one
you like the best.
Advanced menu Advanced menu
Remember that not all options in the menus are available
for all sources/ signals.
Phase: adjusts the horizontal phase of a computer
source.
Tracking: adjusts the vertical scan of a computer source.
Horizontal/Vertical Position: adjusts the position of a
computer source.
Sync Threshold Adjust: (progressive signals only).
If a hardware device, such as a DVD player, is not
syncing properly with the projector, adjust this
option to help it to sync when connected to the projector.
Flesh Tone Correction: this modifies colors to make
the skin complexion better. Sharpness
Film Mode: controls de-interlacing and is On by default.
When checked, it assumes the incoming signal is film
material and optimizes the image accordingly.
Sharpness: (video sources only) changes the clarity
of the edges of a video image. Select a sharpness setting.