Knoll HD178 Projector User Manual


 
25
Supported video formats
Connector Signal Type Supported formats
HDMI
M1-DA
Digital RGB and YCrCb
Digital RGB video via M1-
to-DVI cable
Analog RGB video via M1-
to-VESA cable
YPrPb video via M1-to-
Component adapter
480i/50Hz/60Hz
480p/50Hz/60Hz
576i/50Hz/60Hz
576p/50Hz/60Hz
720p/50Hz/60Hz
1080i/50Hz/60Hz
1080i/50Hz (Australia)
Analog Computer via M1-
to-VESA cable
Digital Computer via M1-
to-DV1 Cable
All industry standard analog and digital computer
formats conforming to VESA standards
Component YPrPb 480i/p/50Hz/60Hz
576i/p/50Hz/60Hz
720p/50Hz/l60Hz
1080i/50Hz/60Hz
1080i/50Hz (Australia)
1080p/24
1080p/60 (sub-sampled)
Composite
S-Video
Composite Video
S-VHS Y/C
NTSC: M, 4.43
PAL: B, G, H, I, M, N
SECAM: M
RGB-C RGB-C or RGB-S via
Scart-to-4 wire RGB
adapter cable
SCART-RGB (576i/p)
RS-232 terminal specifications for HD178 and HD290
Communication configuration
To control the projector from and LCD control panel, connect RS-232 cable to the serial control
connector on the projector and set your computer’s serial port settings to match this
communication configuration.
Setting Value
Bits per second 19,200
Data bits 8
Parity None
Stop bits 1
Flow control None
Emulation VT100