Filter
Top Products
15
Still need assistance?
If you need assistance, visit our website at www.knollsystems.com, or call us at 1 800 566 5579.
during Pacific west coast time. This product is backed by a limited warranty. An extended
warranty plan may be purchased from your retailer or dealer.
When sending the projector in for repair, we recommend shipping the unit in its original packing
material, or having a professional packaging company pack the unit. Please insure your shipment
for its full value.
Using the remote control
The remote uses two provided AA batteries. They are easily installed
by sliding the cover off the remote’s back, aligning the + and - ends of
the batteries, sliding them into place, and then replacing the cover.
Navigation buttons
To operate, point the remote at the projection screen or at the front of
the projector (not at the video device or computer). The range of
optimum operation is up to 30 feet (9.14m).
Press the remote’s Menu button to open the projector’s menu
system. Use the arrow buttons to navigate, and the Select button to
select features and adjust values in the menus. See page 17 for more
info on the menus.
The remote also has:
• Power button to turn the projector on and off (see page 12 for
shutdown info)
• Backlight button to light the remote’s buttons in the dark
• Source buttons to switch among sources (to assign a particular
source to a source button, see page 20) and a source toggle
• Resize button to change the Aspect Ratio (see page 17).
• Auto Image button to resynchronize the projector to the source
• Preset button to select stored settings (see page 18).
• Overscan button to remove noise at the edge of a video image
(page 19).
• Custom button that can be assigned to a special function, like
Blank Screen or Freeze (see page 21).
• Backlight/Flashlight button on the remote underside. Press this
button once to light up the remote, press & hold to turn on the
flashlight.
Troubleshooting the remote
• Make sure the batteries are installed properly and are not dead.
• Make sure you’re pointing the remote at the front of the projector or at the screen, not at the
video device or the computer, and are within the remote range of 30 feet (9.14m).
Using the keypad buttons
Most buttons are described in detail
in other sections, but here is an
overview of their functions:
Menu – opens the on-screen menus
(page17).
Select – confirms choices made in
the menus (page17).
Power–turns the projector on and off. menu navigation buttons
Source–changes the active source.
Up/Down arrows–navigates to and adjusts settings in the menus (page 17).