Filter
Top Products
21
Custom key: allows you to assign a different function
to the Custom key on the remote, allowing you to
quickly and easily use the effect. Highlight an Custom Key
effect and press Select to choose a different one.
• Blank Screen: displays a solid blank image.
• Freeze: takes a snapshot of the projected image.
If you’re watching video, the source video continues to run but the image is frozen.
• Source Info: the default effect. It opens a window with projector and source information.
• Service Info: opens the Service info window.
• Source 4: selects source 4 (by default, Source 4 is the Composite input). This gives you four
direct source options on the remote. See page 20.
Service: To use these features, highlight them and press Select.
Factory Reset: restores all settings to their default. Service menu
Reset Lamp Hours: resets the lamp hours used
counter in the Service Info menu to zero. Do this
only after changing the lamp.
Test Pattern: displays a test pattern. To display
test patterns, first you must assign Blank
Screen to the Custom key (page 21), then click the
Test pattern check box in the Service menu to
turn the option on, exit the menus, then press the
Custom button on the remote. To select the
patterns, use the up/down arrows on the remote Service info
or keypad. To exit the test patterns, press
the Custom button.
Blue Only: turns off the Red and Green
portions of the input, allowing you to properly
adjust the color balance with a SMPTE color
bar pattern.
HDMI DDC: turns off the EDID extension.
Some graphic cards cannot recognize the
projector’s EDID. Uncheck this box if you
have trouble using HDMI or DVI sources.
Service Info: provides information about the
projector’s software, serial number, and lamp. Source info menu
Service Code: only used by authorized
service personnel.
Source Info: provides information about
the active source.