Filter
Top Products
A-61580 November 2007 4-25
Scan Area dialog box The Scan Area dialog box is only available for images when the
Cropping option selected on the Layout tab is either Fixed to
Transport or Relative to Document.
To access the Scan Area dialog box, select Scan Area on the Layout
tab.
NOTE: Select the side and image to be defined by highlighting Front
Image #1, Front Image #2, etc. based on the cropping option
selected for each of these on the main ISIS Driver tab. The scan
areas defined for all camera selections are independent.
Page Size the default paper size is set when a scanner is first
selected. You can choose a different paper size using the drop-down
list box.
NOTE: Page Size and Page Layout selections also appear on the
Layout tab. If you make a change on the Scan Area dialog box,
the same selections appear on the Layout tab and vice versa.
The Page Layout area allows you to select either Portrait or
Landscape.
• Portrait will display the image orientation in the shape of a
conventional portrait, where height is greater than width.
• Landscape will display the image orientation in the shape of a
conventional landscape painting, where width is greater than height.