Filter
Top Products
- 14 -
1. Removing the cable cover
Lifting the hook at the top of the cover, slowly remove the cable cover and expose the cable holders.
Cable cover
Hook
Handling the cable cover
2. Installing the cable cover
Secure cables to the cable holders on the back
of the stand. (Refer to the gure on the right)
Install the cable cover.
It is free to arrange cable settings according to
environment.
●Do not give signal cables or the
power cord a strong pull.
●A strong pull may cause damage on
the connection part inside the
monitor where high-denition
processing technology is applied. It
also may result in felling the monitor
and damaging on the LCD panel. In
the worst-case scenario, the LCD
panel will be broken.
Caution