Kodak G600 Printer User Manual


 
18 www.kodak.com/go/support
Printing without a computer
NOTE: If you don’t press any buttons after 5 seconds, printing starts automatically.
Reducing red eye in your prints
Your printer dock incorporates technology that automatically detects and corrects red
eye in your subjects before you print your pictures.
Your printer dock defaults to red-eye reduction being always on, and the Red-eye
reduction button/light, , glows green.
Red-eye reduction is applied to images that were captured using the flash on your
digital camera.
The Red-eye reduction button is disabled when printing from a computer. If
printing from a computer (see page 24), make sure Kodak EasyShare software is
installed on the computer.
Printing may slightly increase when using red-eye reduction.
Your printer dock may apply red-eye reduction to an area such as a sunburn, which
darkens the area in your print. Turn off red-eye reduction.
To turn red-eye reduction off, press the Red-eye reduction button, .
To change the red-eye reduction default to off, press and hold the Red-eye
reduction button, , for 5 seconds.
The Red-eye-reduction light blinks, then turns off.