Filter
Top Products
KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector
26
Image appears flat with no
contrast
To adjust the contrast:
1.Press Menu and use the Adjust + -
buttons to go to the Adjust tab.
2.Use the Next button to highlight
Contrast.
3.Use the Adjust + - buttons to
increase or decrease the contrast.
Image appears washed out or
dark.
• Check the projection lens to see if it
needs cleaning.
• To adjust the brightness:
1.Press Menu and use the Adjust + -
buttons to go to the Adjust tab.
2.Use the Next button to highlight
Brightness.
3.Use the Adjust + - buttons to
increase or decrease the brightness.
Image is "noisy" or streaked. • From the Setup tab in the menus, adjust
the frequency and tracking manually to
find an optimal setting.
• Try connecting to another computer.
The problem could be with your
computer's video card.
Image is wider at the top or
bottom of the screen.
This keystoning effect is caused by the
projection angle not being perpendicular
to the screen. For a more pleasing image
result, raise or lower the front legs or
prop up the back of the projector.
Image is wider at one side
than the other
Make sure the projector is at a 90 degree
angle to the screen.
Problem Solution