Filter
Top Products
Clearing Media Misfeeds
95
4 Pull out Tray 1, and then remove
all media from the tray.
5 Fan the media you removed and
then align it well.
" If transparencies are loaded, do not fan them; otherwise, static
electricity may be produced, resulting in another media misfeed.
6 Load the media face up in Tray 1.
" Make sure that the media is flat.
" Do not load paper above the
▼
mark.
Do not load more than 10 envelopes or 20 sheets of labels, post-
cards, thick stock, or transparencies at one time.
" Slide the media guides against the edges of the media.
7 Close Tray 1.