Filter
Top Products
Dual In-Line Memory Module (DIMM)
129
5 Insert the new DIMM straight
into the DIMM connector until
the latches snap into the locked
position.
Observe the keyed side of the
DIMM to align it with the connec-
tor. If you cannot snap the DIMM
into place, do not force it. Repo-
sition it, making sure that the
DIMM is seated completely in
the connector.
6 Reinstall the panel and tighten the seven screws.
7 Attach the rear cover.
8 Reconnect all interface cables.
9 Reconnect the power cord, and
turn on the printer.
10 Print a configuration page (SPECIAL PAGES/PRINT CONFIG PAGE
MENU
) and verify that the total size of the RAM installed in your printer is
listed.