Filter
Top Products
Error messages
5
TWAIN Driver 5-6
Scanning error
Computer display message:
2
Note
The network cable can be used only when the optional network interface
card NC-503 or image controller IC-206 is installed.
Automatic document feed no paper
Computer display message:
Cause Remedy
An error occurred while the machine was
reading data during scanning.
• Turn off the machine, and then check
that the USB cable and network cable
are correctly connected.
• After checking the USB cable and net-
work cable, turn on the machine again.
• If the error is still not corrected, contact
your technical representative.
Cause Remedy
There is no paper in the automatic document
feeder (reverse automatic document feeder)
when duplex scanning is selected.
Add paper to the automatic document
feeder (reverse automatic document feed-
er).