DS Vision® Digital - Advanced Management Features 19
Note: The receiver does not receive an IP address and is not visible
as an IP network element.
To learn more about the MDS management technology, features and benefits,
refer to the ScreenGate Management Gateway documentation.
9.1 Continuous Playback Configuration
Two active players can be connected to the DS Vision Digital system, one
primary and the other secondary. If the primary player becomes unavailable the
secondary player can be activated remotely, to enable continuous playback.
To set up a continuous playback configuration:
• Connect two players: “Primary” and “Secondary” to the
broadcaster/transmitter.
• If one player has a DP output and the other player has an HDMI output, the
players can be connected to the DP and HDMI connectors respectively using
the following cables:
DP to DP (Display Port male, male)
HDMI to HDMI (type A, male/male)
• If both players have DP or HDMI connectors, use a DP to HDMI converter
cable or an adapter to connect one of the DP players to the HDMI input.
Figure 17 illustrates the continuous playback configuration connections:
i