Filter
Top Products
15
2. Installation
2-1. Starting 24 FAST ETHERNET + 2 GIGABIT L2 MANAGED
SWITCH Up
This section will give users a quick start for:
- Hardware and Cable Installation
- Management Station Installation
- Software booting and configuration
2-1-1. Hardware and Cable Installation
At the beginning, please do first:
⇒ Wear a grounding device to avoid the damage from electrostatic discharge
͒
͒͒
͒C
CC
CInstalling Optional SFP Fiber Transceivers to the L2 Managed Switch
Note: If you have no modules, please skip this section.
͒
͒͒
͒ Connecting the SFP Module to the Chassis:
The optional SFP modules are hot swappable, so you can plug or unplug it
before or after powering on.
1. Verify that the SFP module is the right model and conforms to the
chassis
2. Slide the module along the slot. Also be sure that the module is properly
seated against the slot socket/connector
3. Install the media cable for network connection
4. Repeat the above steps, as needed, for each module to be installed into
slot(s)
5. Have the power ON after the above procedures are done
Fi
g
. 2-1 Installation of O
p
tional SFP Fiber Transceive
r