Filter
Top Products
67
3-4. Loop Detection
Looping will always occur when the switches are connected as a cycle and a switch
transmits the packets that will go back to the transmitted switch. Loop Detection will
prevent the looping from happening. Moreover, it could remove the looping
phenomenon per port. In general, you can unplug the cable connection to stop the
looping when a port causes the looping. The switch has powerful Looping Detection
capability, which could cease the looping immediately.
Fig. 3-16 Loop Detection
Function name:
Loop Detection
Function description:
This function will start when you enable looping action by ticking the
check box () of the Action. That will create some special packet for