Filter
Top Products
24
͒
͒͒
͒C
CC
CSet IP Address, Subnet Mask and Default Gateway IP Address
Please refer to Fig. 2-7 CLI Management for details about factory setting. They are
default setting of IP address. You can first either configure your PC IP address or
change IP address of the switch, next to change the IP address of default gateway
and subnet mask.
For example, your network address is 10.1.1.0, and subnet mask is 255.255.255.0.
You can change the switch’s default IP address 192.168.1.1 to 10.1.1.1 and set the
subnet mask to be 255.255.255.0. Then, choose your default gateway, may be it is
10.1.1.254.
Default Value 24 FAST Your Network Setting
IP Address
192.168.1.1
10.1.1.1
Subnet
255.255.255.0 255.255.255.0
Default Gateway
192.168.1.254 10.1.1.254
Table 2-3
After completing these settings in the switch, it will reboot to have the configuration
taken effect. After this step, you can operate the management through the network,
no matter it is from a web browser or Network Management System (NMS).
Managed Switch – 2262 FE Switch
Login: admin
Password:
2262 FE Switch
Fig. 2-8 the Login Screen for CLI