Filter
Top Products
17
English
Paper selection
General guidelines
The duplexer may not be used to print on paper not satisfying the requirements
below. Also, special types of print media such as overhead projection (OHP) film,
envelopes, adhesive-backed labels, and paper containing watermarks must not be
used with duplex printing. These types can result in jams, misfeeds, and paper
waste, and in extreme cases can damage the duplexer.
Note The manufacturer assumes no liability for problems that
occur when paper not satisfying these requirements is used
with the duplexer.
Selection of the right paper is important. The wrong paper can result in jams,
misfeeds, curl, poor print quality, and paper waste, and in extreme cases can
damage the duplexer and the printer. The guidelines given below will increase the
productivity of your office by ensuring efficient, trouble-free printing and
reducing wear and tear on the duplexer and the printer.
Paper availability
Most types of paper are compatible with a variety of machines. Paper intended for
xerographic copiers can also be used with the duplexer and the printer.
There are three general grades of paper: economy, standard, and premium. The
most significant difference between grades is the ease with which they pass
through the printer. This is affected by the smoothness, size, and moisture content
of the paper, and the way in which the paper is cut. The higher the grade of paper
you use, the less risk there will be of paper jam and other problems, and the
higher the level of quality your printed output will reflect.
Differences between paper from different suppliers can also affect the duplexer’s
performance. A high-quality printer cannot produce high-quality results when the
wrong paper is used. Low-priced paper is not economical in the long run if it
causes printing problems.
Paper in each grade is available in a range of basis weights (defined later). The
traditional standard weights are 19, 20, and 24 pounds (70 g/m
2
to 90 g/m
2
).