Filter
Top Products
Kyocera Digital Library CD-ROM
The Kyocera Mita Digital Library offers the most current printer drivers, software
utilities and reference manuals. The Library CD contains the following components:
¡ Install Drivers
¡ Driver Tools
¡ Printer Utilities
¡ Networking
¡ Installation Notes
¡ Select Language
The latest Drivers and Utilities are also available on the internet at
www.kyoceramita.com.au
Driver Emulations
Kyocera printer drivers support PCL and KPDL emulations. PCL, or Printer
Command Language was developed by Hewlett Packard® (HP) to provide a
simple and effective method for controlling a printer. In this language, the printer
commands appear as embedded escape sequence codes in the print job data
interpreted by the printer. Kyocera PCL drivers allow for font scaling, outline
fonts, and vector graphic printing. PCL is not supported on Macintosh and UNIX
based systems. Note: The factory default emulation for Kyocera printers is PCL.
If the selected printer driver does not match the printer emulation, the printer
emulation must be set for PCL, KPDL or KPDL (Auto) at the printer's front
panel.
PCL 5c
Kyocera colour drivers utilize the PCL 5c colour printer language. This printer
command language supports the commands necessary for colour printing, and
supports PJL (Printer Job Language) commands, which allow for bi-directional
communication between the printer and the computer. PCL 5c also provides
complete backwards driver compatibility with earlier PCL versions, and offers a
wide selection of fonts for use with Microsoft Windows applications.
PCL XL
Kyocera XL printer drivers utilize the PCL 6 printer language. PCL XL drivers
offer improved graphics printing, reduced file sizes, better print speeds, and
faster return to application than the PCL 5e driver. Drawbacks include no
backwards compatibility and the fact that not all Kyocera printer models support
XL printer drivers.
KPDL
Kyocera Page Description Language (KPDL) represents Kyocera's emulation of
PostScript printing. Because the printer is set to a factory default of PCL, you
must change the emulation from the printer's control panel or send the printer a
command. PostScript print drivers have strong graphics reproduction
performance and usually print slower than PCL drivers.
FS-C5020N and FS-C5030N Product Guide
FS-C5016N
- 40 -
Print System Utilities