To get started, connect an external USB hard drive to the LaCinema Mini HD Bridge via one
of the USB 2.0 host ports or insert a 2.5” SATA hard disk drive (5400 rpm recommended)
within its enclosure. See the User Manual for more information.
NOTE: The LaCinema Mini HD Bridge is compatible with NTFS (Windows), HFS+ (non-journaled - Mac),
and FAT32 (Windows and Mac) file systems.
2.5” SATA Hard Disk Drive Insertion (Optional):
1. Make sure the power and USB cables are disconnected.
2. Turn the casing over so the rubber feet are pointing up. Note the two plastic
bands for prying the bottom plate from the top shell.
3. Open the casing by taking one plastic band in each hand, between the thumb
and index finger, and pull gently until the bottom plate and the top shell have
come apart.
Hard Drive Options