Filter
Top Products
4. Slide the disk drive, label facing up,
onto the bottom plate rails until the
drive’s SATA connector plugs into the
LaCinema Mini HD Bridge’s internal
SATA port.
NOTE: When inserting the hard disk, make sure
not to damage the WiFi antennas.
5. Secure the disk drive in the casing by
inserting the two included screws into
the slots as indicated.
6. Replace the top of the casing by first
aligning the ports on the bottom plate
with the cutouts on the top shell and
then gently press down until you hear
a “click”, indicating that the casing has
been successfully closed. Pay close
attention to the connectors in the back
of the device when replacing the top of
the casing.
WiFi
Antenna
WiFi
Antenna