Filter
Top Products
Installation
14
ETS Installation Guide
a) It runs through a set of power-up diagnostics for approximately 12 seconds.
The LEDs show varying patterns corresponding to the tests being run.
b) It tries to obtain TCP/IP configuration information via DHCP, BOOTP, and
RARP. This may take as long as 15 seconds if no hosts answer the requests.
During this step, the OK LED blinks approximately 3 times per second and
the NET LED blinks occasionally.
7. Install EZWebCon on your 32-bit Windows PC computer. The EZWebCon
software is located on the distribution CD-ROM. Alternatively, download it from
ftp://ftp.lantronix.com
.