Lantronix ETS16PS Network Card User Manual


 
ETS Installation Guide
53
C
C
:
:
P
P
i
i
n
n
o
o
u
u
t
t
s
s
Ethernet Connector
Figure C-1. RJ45 Ethernet Connector
RJ45 Serial Connectors
ETS servers are RS-423 compliant, and are thus limited by the equipment at the
remote end of the serial line. If the port is connected to an RS-232 device, it is
subject to RS-232 limits: 15m (50 ft.) in length at 9600 baud, and to 2m (6 ft.) at
115.2K baud, although longer lengths will generally work.
Figure C-2. RJ45 Serial Connector
RJ45 to DB25
If you are connecting an RJ45 port to a DTE device (such as a terminal) that has a
DB25 connector, you will need to use an RJ45-DTE DB25 adapter. To connect an
RJ45 port to a DB25 connector on a DCE device, you will need an RJ45-DCE DB25
adapter. The pinout information for both connections is shown in Figure C-3.
Note: For a full list of adapters, see
http://pscprod.lantronix.com/paal/paalInterfaceLookup.jsp
.