Filter
Top Products
11: Advanced Settings
EDS Device Servers User Guide 116
Figure 11-4. Command Line Interface Configuration Page
Command Line Interface Configuration Page
Command Line
Interface Configuration
Page Settings
Description
Telnet Access Select whether Telnet access is enabled. Choices are:
On = Telnet access is enabled. (default)
Off = Telnet access is disabled.
Telnet Port Enter the number of the port on which the EDS listens for
incoming Telnet connections. Default is 23.
SSH Access Select whether Secure Shell (SSH) access is enabled.
Choices are:
On = SSH access is enabled. (default)
Off = SSH access is disabled.
SSH Port Enter the number of the port on which the EDS listens for
incoming SSH connections. Default is 22.
Password Enter the password that must be specified for the initial
Telnet login session. Default is PASS.