Lantronix EDS4100 Network Card User Manual


 
A: Factory Default Configuration
EDS Device Servers User Guide 130
Accept Mode
Accept Mode Parameters Accept Mode Settings
Accept Mode Enabled
Local Port Port 1 = 10001, Port 2 = 10002, Port 3 = 10002,
and so forth.
Protocol TCP
Flush Serial Data Disabled
Block Serial Data Off
Block Network Data Off
TCP Keep Alives 45 seconds
Email on Connect None
Email on Disconnect None
Password None
Prompt for Password Off
Connect Mode
Connect Mode Parameters Connect Mode Settings
Connect Mode Disabled
Remote Address None
Remote Port None
Local Port Random
Protocol TCP
Reconnect Timer 15000 milliseconds
Flush Serial Data Disabled
SSH Username None
Block Serial Data Off
Block Network Data Off
TCP Keep Alives 45 seconds