Filter
Top Products
5: Commands and Levels
EDS-MD Command Reference 101
reply to <text>
Sets the Reply To address for email alerts.
<text> = email address to place in the Reply To field of the
email alert.
send
Sends an email using the current settings.
server port <number>
Sets the port used by the SMTP server.
<number> = port used for SMTP on the server side.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
show log
Displays the email log.
show statistics
Displays email statistics.
subject <text>
Sets the Subject for email alerts.
<text> = text to placed as the subject.
to <text>
Sets To addresses for email alerts.
<text> = a quoted, semicolon separated list of email addresses.
write
Stores the current configuration in permanent memory.
enable (enable) level commands
auto show interfaces
Show interface statistics
auto show processes
Continuously show thread runtime information
clrscrn
Clears the screen.
configure
Enters the configuration level.
connect
Show name and number for lines.
connect line <line>
Begin session on serial port.
device
Enters the device level.
disable
Exits the enable level.
dns
Enters the DNS level.
email <number>
Enters the configure email level.
exit
Exit from the system
filesystem
Enters the filesystem level.
kill ssh <session>
Kills SSH session with index from "show sessions"
kill telnet <session>
Kills Telnet session with index from "show sessions"
line <line>
Enters the line level.
<line> = number of the line (serial port) to be configured.
ping <host>
Ping destination continuously with 5 second timeout
ping <host> <count>
Ping destination n times with 5 second timeout
ping <host> <count> <timeout>
Ping destination n times with x timeout (in seconds)
reload
Reboot system
reload factory defaults
Reload factory defaults to permanent storage
show
Show system information
show history
Displays the last 20 commands entered during the current CLI
session.
show interfaces
Show interface statistics
show ip sockets
Show UDP/TCP state information
show lines
Show line information
show processes
Show thread runtime information
show sessions
Show active Telnet and SSH Sessions
ssh
Enters the SSH configuration level.