Filter
Top Products
NetWare Configuration NetWare Host Troubleshooting
5-5
Table 5-3: NDS Errors from the File Server
Code Meaning Remedy
0xfffffda7 Object could not be
found in the given
context
Check the MPS server name, DScontext, and DStree to
ensure the printer server is set up correctly with PCONSOLE.
0xfffffda5 Requested attribute
could not be found
Use PCONSOLE to ensure that the MPS has associated print-
ers and the printers have associated queues.
0xfffffd69 DS Database is locked An administrator is probably updating the database. Wait a
few minutes and issue the Set Protocol NetWare Reset com-
mand.
0xfffffd63 Invalid password The password for the print server object under PCONSOLE
must match the MPS login password. If the login password
on the MPS is left as the default (access), there should be no
password for the print server object.
0xfffffd54 Secure NCP violation Turn down the NCP packet signature level so that it is not
required.
Table 5-4: NDS Printing Errors
Bit Meaning Remedy
1 Server out of memory Turn the MPS off, wait a few seconds, and turn it back on. Disable
unused protocols and/or remove fileservers without print queues
from the NetWare access list.
2, 3 Unexpected response
from file server
Report the problem to Lantronix Technical Support.
4 No printers found for
the MPS
Ensure that there are printers for the MPS, and the printer names
match the service names on the MPS.
5 No printer queue found Ensure that the printers have associated queues.
6 Login failed Ensure there is a print server object configured with the same
name as the MPS.
7 Authentication failed Ensure the MPS login password is the same as the print server
object password. If the MPS is using the default password
(access), there should be no print server object password.
8 Server cannot attach to
queue
Check the NDS partitions, replicas, and volumes to ensure the file
server where the queue lives has the correct information.