Lathem LTTC Time Clock User Manual


 
4 - LT Series Operations Manual
LT SERIES MODELS
LTD
Registers date, month, and year. Type wheels must be advanced manually.
Year wheels carry ten (10) years.
LTN
Registers consecutive numbers. Basic unit includes six (6) numbering wheels
which advance automatically. Up to five additional numerical, letter, or code
wheels may be purchased. The additional wheels must be advanced manually.
(Note: The manual registration button is standard on this module.)
LTT(C)
Registers time, date, month, and year. Type wheels advance automatically.
Month and date wheels must be reset manually the first day of each month.
Models with a "C" designation have the optional digital display.
LTTN(C)
Registers time, date, month, and year, as well as consecutive numbering. The
unit includes six (6) numbering wheels which advance automatically. Month
and date type wheels must be reset manually the first day of each month.
Models with a "C" designation have the optional digital display. (Note: The
manual registration button is standard on this module.)
CONSECUTIVE/DUPLICATE COUNT
Models LTN and LTTN can repeat the same number once, twice, three times or
four times before automatically advancing. (For jumper/shunt selection, see
page 9, "Consecutive / Duplicate Count.")
OPTIONAL FEATURES
REPEAT/ADVANCE SWITCH
Overrides automatic numbering advance to allow repeating the same number if
desired, or advances to a higher number. (See page 8 for operating instructions.)
INSCRIPTION PLATES
The die plates may be permanently fixed or removable. They can have up to 3
lines of 20 characters per line, or carry facsimile signatures. (Note: Removable
die plates must be removed before opening top frame and reinstalled after
closing top frame.)