Filter
Top Products
Using Your AIT Drive
page 13
LaCie d2 SCSI AIT Drive
Warning! The Tape Log, which contains a history of the tape’s usage, will not be updated if the cassette is
write-protected. The Tape Log may become inaccurate if the tape is used when write-protected, and the media
warning cannot be relied upon to indicate that the cassette needs to be copied and replaced.
LED Patterns
The LEDs on your LaCie AIT U&I drive can indicate different states or conditions. The following chart shows you what the LEDs
mean.
Figure 1 – LED Flashing Patterns
Type of Flash Busy LED Tape LED Status LED
No Tape Loaded
Off Not busy
On Bus Activity Tape Loaded Write Protected
Quick Flash
(0.25s on/0.25s off) Drive Active Loading/Unloading Cleaning Tape at End of Media
Slow Flash
(3.5s on/0.5s off) Error Rate Warning Cleaning Cartridge Request
Slow Pulse
(0.25s on/1s off) Waiting for Reset Waiting for Eject
Double Pulse Self Test Failure